User`s manual

30
6. Troubleshooting
Using Microsoft USB2.0 driver with Windows 2000
If you want to use Microsoft USB2.0 driver with Windows 2000 after installing the driver
as described in Chapter 3-2, follow the steps:
1. Insert the CBU2 CD-ROM into the CD-ROM drive. The installer will start up automatically.
If the installer won’t start up automatically, run [Setup.exe] at the CD-ROM.
The following window will appear. Click [OK].
2. The following window will appear. Click [Finish].
3. Click the PC Card icon shown at the lower right corner and select [Stop RATOC CB USB
Enhanced Host Controller].