Setup guide

RAL-KEB02iP (USB_DAC Mode) User's Guide Rev 1.00 01/July/2014 7
4-2. Rear panel
(1). Digital Audio Stream Input for iPod/iPhone/iPad
USB-A Connector : Compliant with USB 2.0 Full Speed(12Mbps) Spec.
*KEB02ip works as USB-Host but does not provide charging current from this connector.
It can provide USB Bus_Power to USB device up to 100mA.
*Don’t use this connector at USB_DAC mode. Never connect iPod/iPhone/iPad to this
connector when Mode select Switch is set for USB_DAC mode.
(2). Digital Audio Stream Input for PC/Mac.
USB mini-B Connector : Compliant with USB 2.0 High-Speed(480Mbps) Spec. and
KEB02iP works as the USB Audio Class 2 Audio Device.
*This connector is used in USB_DAC mode. Don't connect any device when iPod
Legacy Support Compatible mode is selected.
(3). DC+5V power input for charging.
USB micro-B Connector : Must connect DC+5V( +0.25V, -0.25V, 0.5A minimum )
Power supply unit to charge internal battery with USB-A to micro USB-B cable.
*AC adapter is not included in
the box. Soled separately.
* Use DC+5V(+0.25V -0.25V)/1 to 2A Switching type AC adaptor or USB port of PC/Mac.