Setup guide

RAL-KEB02iP (USB_DAC Mode) User's Guide Rev 1.00 01/July/2014 5
3. Package contents
RAL-KEB02iP package includes:
●
RAL-KEB02iP
●USB 2.0 Cable ( USB-A to mini-B ) for USB_DAC mode x1.
●USB-A to micro-B Cable for charging x1.
●USB-A to iPod 30P Dock cable (0.1m) for iPod Compatible mode x1.
●USB-A to Lightning cable (0.1m) for iPod Compatible mode x1.
●Silicon Band to bundle iPod/iPhone with KEB02iP.
** AC adapter (DC +5V/1A) is not included in the package.
4. Front Panel, Rear Panel Layout
4-1. Front Panel
(1). Power & Volume Level
Power off : Turn Counter Clock wise to 7 O'clock position and check Click sound and
lighting off PW/LB LED.
Power on: Turn Clock wise from 7 O'clock position and check Click sound and lighting on
PW/LB LED.
Volume level control: adjust Headphone output level to your favorite level.
(2). PW/LB LED.
Light on to indicate the operating state. Green light indicates Battery level is over 3.4V
and Red light indicates Low Battery state below 3.4V. In this case, charging is required.