Setup guide

RAL-KEB02iP (USB_DAC Mode) User's Guide Rev 1.00 01/July/2014 16
6. Setting up Windows PC ( Windows 8, 7 )
This chapter describes the driver installation and setting on Windows 7 as an example,
these process is almost the same as one on Windows 8, Vista, XP.
Getting started with setting up Windows 7 ( 32bit or 64bit ) PC.
6-1. Installation of USB Audio 2.0 Class Driver
RAL-KEB02iP requires USB Audio Class 2.0 Driver. You need to install it before
using it. If you forgot it or failed to install the driver, RAL-KEB02iP would not be
configured as a USB Audio Device.
(1) Turn off Power of KEB02iP and select USB_DAC mode. And then turn on power of
KEB02iP.
(2) Connect RAL-KEB02iP to USB 2.0 HS(480Mbps) enabled port on PC.
(3) Log in as an Administrator. You must log in as an Administrator to install USB Audio Class 2.0
Driver.
(4) Download RAL-KEB02iP Driver from
http://www.ratocsystems.com/english/download/driver/keb02ip.html
and follow the instructions at the site and install the driver.
(5) Click and run KEB02iP_driver.exe. User Account Control window will appear and show RATOC
Systems, Inc. as the Verified publisher name. Click 'Yes' to go to next step.
(6) "RAL-KEB02iP installer" will start automatically. Click 'Next' to start installation.