Manual

52
5-4.Capturing a video from a DVCAM in camera mode
When you want to capture a video image from a DVCAM set to camera mode, follow steps
through.
1. Confirm a DVCAM is set to camera mode.
Camera mode means you can capture a video image. If your DVCAM is in video mode,
change mode selection switch from video mode to camera mode slowly. Everytime you change
DVCAM’s Mode Control switch, move this switch to OFF position and confirm that the
RsDvCap’s Camera device name will disappear. After that, you can change this switch to your
choice and the camera device name will appear.
2. Select [DV mode] on the [Application Setting] as shown in 5-3.Application settings.
3. Click the button on the Camera Control bar. A video image from a DVCAM
will appear.
4. Click the button to start capturing.
5.Click the button to stop capturing.
You can also stop capturing by using the button on the Camera Control Bar or
pressing ESC button on the keyboard.
6. If you checked [Rename file name every capture execution] on the [Application Setting],
You will see the window.You can
rename the captured file.
7.The file will be saved in the folder
you set at [Set Folder Name To Save
Capture Files] on the [Application
Setting].
NOTE
When you preview, it puts some load on PCs. If data loss happens, don't check [Capture
With Preview] on the [Application Setting]. For more information, please refer to page
10-3.When playing back the captured file is choppy or jerky in 10.Troubleshooting.