User`s manual

3
2. Setting
This chapter explains how to set up U2-MDK1U. Proceed to Chapter 2-1.
2-1.Attaching a HDD to U2-MDK1U
To attach a HDD to the U2-MDK1U, follow the steps:
(2)Slide cover off the HD case and connect power and data cable to the HDD.
Mount the HDD in the HD case with the screws provided.
(NOTE)You must set [MASTER] position at HDD jumper setting.
For a Western Digital HDD, set [SINGLE] position at HDD
jumper setting. For more information, refer to its manual.
(3)Reinstall cover on the HD case and push the HD case back into the
removable case.
(4)Lower handle and lock the HD case with the lock key provided. If you don’t
lock it, U2-MD1U won’t work.
Next, proceed to 2-2 to attach the U2-MDK1U to your computer.
(1)Turn the key switch to the UNLOCKED POSITION. Then, lift handle to
release the HD case from the removable case and pull out.
Screws
Power cable and data cable
Handle
Removable case
Power LED
Key switch
HD case
Cover
Handle
Access LED