User`s manual

11
3-2.Windows Me/2000/XP
Turn the key switch to the LOCKED POSITION.
The driver will be copied automatically. Proceed to Chapter 3-3 to confirm
the installation.
3-3.Confirming the installation
Open [My Computer]. If you can find a Removable Disk icon as shown
below, the driver installation is successful.
When you double click on the Removable icon and get an error saying
the device is not ready, check the following:
1)The key switch must be in the LOCKED POSITION.
2)The HDD in the U2-Dock must be formatted.
Refer to Chapter 5 for formatting.
Proceed to Chapter 4 for how to use the U2-MDK1.