Instruction manual

Convenient Features
5-20
Changing Modes
In the lower left of the main window, you can see the recording device and the file name, and select the file
to reproduce.
※ Notes 1: If the remaining time is displayed in cyan color, it indicates that the media has
a free space of 4GB or more and that the actual remaining time is much longer than
the displayed time.
※ Notes 2: If the data transfer speed is low, this item is displayed in yellow or red and it
indicates that data transfer to the PC is delayed. In such a case, the memory in the LX
main unit might become full and the recording might finish earlier than the recordable
time that is being displayed.
Switch between the recording mode and view mode
<In Recording mode>
<In View mode>
Display the storage location
and file name
Select the file to be reproduced
Comments written using
File
and
New
Comment written in the file being
reproduced
Select the sampling frequency
Select the reproducing rate
Select the monitoring channel
Select the monito
ring channel
Period recordable on the selected
device (hours:minutes:seconds)
※
※※
※Notes 1
Notes 1Notes 1
Notes 1
Period recordable on
the PC (hours:minutes:seconds)
※
※※
※Notes 2
Notes 2Notes 2
Notes 2
The serial number or
recorder name of the
target unit
Select the voice memos
ON or OFF
Condition of voice memos
ON/OFF saved on
the file to be reproduced
Remaining free space of
the selected device（％）