Instruction manual

Reproducing
5-15
Mark
Moves to the preceding or following event mark. When you select Mark, the lower box displays the total
number of event marks in the current file.
Time
Moves the selected time (hours:minutes:seconds). When you select Time, the lower box displays the time
when recording to the current file started, and the time when recording to the current file ended.
Advanced search
You can narrow searches by using the status display area.
1. With the View mode set in the paused or stopped status, click on any of the status-display boxes
indicated by arrows in the following diagram. After the color of the characters changes, click again.
2. Specify the goal of the search.
Event search
Searches for the specified event mark.
The upper 2 boxes show the range of values that can be
searched.
Enter the number to be searched and click the “OK” button.
Count search
Searches for times (hours:minutes:seconds) from the
start of recording.
The upper 2 boxes show the range of values that can be
searched.
Enter the time to be searched and click the “OK” button.
Time search
Searches using your specified recording date and time.
Enter the date (year/month/day) and time (hour: minute:
second).The upper 2 boxes show the range of values
that can be searched.
Enter the date to be searched and click the “OK” button.
3. After specifying the goal of the search, click the “OK” button to close the dialog box. At the goal point,
the system enters the stopped status. To cancel the searching operation, click the “Cancel” button to close
the box.
4. Click on the toolbar. Data is reproduced starting from the goal point.