Instruction manual

Reproducing
5-14
You cannot use the monitor output of the analog signal when reproducing at the low-speed sampling series
(1 kHz to 1/60 Hz). When you use the analog output at the output amp, it is necessary to buy an optional
unit.
The total number of folders and data files, which can be created on a PC Card and operated correctly, is
10,000. You can create and record in excess of 10,000 folders and data files, but, these recorded files
cannot be copied or reproduced.
Operations to control reproduction
At the LX Navi
At the LX main unit
■ The skip functions are available during a pause or in the stopped status. For details, see the next topic.
Moving Reproducing Point (Skip)
Skipping enables you to move the reproduction point. The skip function is available in the paused or
stopped status. When you click the button, the reproduction point moves from its current location
to its previous location. When you click the button, the reproduction point moves from the current
location to the following point. (Display of a waveform is from the start or restart of reproduction after a skip.）
You can specify the range of the movement by one click.
To specify the range of the movement click on the toolbar. The following dialog box is displayed.
You can select from the following 4 options:
File
Moves from the current file to the older file (determined by ID number) in the same folder.
Scan
Moves the specified number of scans only. When you select Scan, the lower box displays the total number
of scans of the current file.
Skip forward
Skip to previous
Start reproduction, re
-
start
reproduction after pause or skip
Start reproduction, re
-
start
reproduction after pause or skip
Pause at the current position
Stop by returning
the beginning of the file
Pause at the current
position
Start reproduction, re
-
start
reproduction after pause or
skip
Total number of scans of the
current file, etc
Move reproducing point