Instruction manual

Reproducing
5-13
■ The total number of folders and data files that can be created on a PC Card and operated correctly is
10,000. You can create and record in excess of 10,000 folders and data files, but, these recorded files
cannot be copied or reproduced.
Reproducing
You can reproduce data that has been recorded to memory or media.
1. From the File menu choose Open.
2. Select the file to be reproduced.
3. Click OK. (The mode in the status display becomes VIEW.））
4. Click on the toolbar. Alternatively, press the FWD button on the main unit.
The action display changes to PLAY, and reproduction begins.
■ Changing the Reproduction Rate
You can reproduce data at a different rate from the recording rate. To change the rate, first open the file by
following the steps described above, and then change the Sample setting on the left of the main window, or
from the Setup menu choose System and then change the Sample setting.
Changing the reproduction rate does not change the sampling frequency setting for recording.
The rate of voice memo reproduction is not changed even when the Sample setting is changed. In this case,
the data and the voice do not synchronize.
Changing the reproduction rate is possible within the same sampling frequency series.
Dire
ctory path
opened
previously
Specify the directory to
be opened
Select the file to
be reproduced
File
name to be
reproduced
Comment recorded on
the header file
Select the reproducing mode.
Single: Reproduce the specified file.
Repeat: Reproduce the specified file repeatedly.
Continue: Reproduce the specified file, and then to
the next files automatically