Instruction manual

Specifying Recording Devices and File Names
5-5
■ If memory becomes full
If memory becomes full during recording, the recording stops and a message is displayed on the PC screen.
■ Recording to a PC While Recording to Memory
To record to a PC while recording to memory, select PC Recording, enter the storage-destination directory
in PC, and then type the file name in the entry box below that. Also specify the number of digits in the ID
number.
Dropouts may occur in the data recorded on the PC if the PC cannot keep up with the transfer speed.
However, in this case, the data recorded in memory is not lost.
The voice memo is not recorded on the PC, although it is kept in memory.
■ Automatically Save Data to Media
You can specify that data is to be automatically saved to the media after the recording to memory stops.
Before opening this New dialog box, insert the media. Select Auto Saving and enter the folder name in
Directory. Use up to 8 characters for the folder name, with the upper case used for alphabetic characters.
However, if you forget to insert the media before the recording starts, you will be unable to copy
automatically even if you insert the media later. In such a case, use File and then Copy to copy.
Even if Auto Saving is selected, when the LX is powered off the setting is disabled. So select Auto Saving
whenever you turn the power on. Do not use this function when using the LX as a stand-alone device
because, in such a situation, the system does not know how much free space is left on the media. In case
the free space of the media is not enough, the file created will be decreased in size for saving on the media.