Instruction manual

Specifying Recording Devices and File Names

5-2

Specifying Recording Devices and File Names

The general procedure for recording is as follows:

1. Choose File → New, and specify the recording device and the file name. (The mode becomes the

recording mode.）

2. Use the toolbar or the buttons on the main unit to record.

3. If you are recording to the memory, use the Copy dialog to copy to the media (PC card).

■ A combination of the sampling frequency vs. the number of analog input channels varies depending on

the selected recording mode, such as the type of the recording media and the number of tachometer input

channels. See “Sampling Frequency and Number of Channels” on page 1-13.

File → New

Automatically save to the media after the

recording to the memory stops

Simultaneously

recording

to PC

Select the

storage destination

File name when using

File Name

(5 characters.)

Specify the directory on the

media

History of storage

destinations

Comment(128

characters)

Specify

the

number of

digits in the ID number

You can also select the recording

device here

Specify the