Instruction manual

Saving and Loading Settings
4-28
■ The setting parameter file is saved as ASCII format, so that you can open the file by using the word pad
program of Windows. Never replace the contents or you will not be able to load the file at the LX.
Loading Settings
Load the prm file previously saved.
1. Click Load at the Params Property dialog.
2. When you select the LX (the media loaded into the LX main unit) for the destination to load, the LX
Parameter File List dialog will be displayed. Select the file name to load its parameters, and then click OK.
The loaded file name is displayed at the Params Property dialog.
3. When you select the PC for the destination to load, the Open dialog will be displayed. Enter the folder to
load and the file name, and then click [Open (O
)].
The loaded file name is displayed at Params Property dialog.
4. Click OK at the Params Property dialog.
The LX will be set at the contents of the loaded file.