Instruction manual

Saving and Loading Settings
4-27
Repeat Count
Specify the number of times the recording is to be repeated. A file is made for each of the specified number
of times. You can also specify “1” to record one time only. Specifying 0 will result in an unlimited number of
repetitions (repetitions until you manually stop recording). The maximum value is 65535 counts.
Saving and Loading Settings
The parameters that you set after choosing the Setup menu and then System and Trigger can be saved to
a file and then loaded whenever required. When you choose Params Property from the Setup menu, the
following dialog box is displayed.
Saving Settings
Save the parameter settings as a file. The file extension is “.prm”. We recommend that you save your
settings to avoid potential problems.
1. Click Save at the Params Property dialog.
2. When you select the LX (the media loaded into the LX main unit) for the destination to save, the LX
Parameter File List dialog will be displayed. Enter the file name to save the setting parameters at the
bottom of the dialog, or select the file name for which the parameters will be changed, and then click OK.
3. When you select the PC for the destination to which to save, the Save As dialog will be displayed. Enter
the folder to save and the file name, and then click [Save(S
)].
Load the settings
Save the settings
System information
Settings for each
channel
Select the load and save
destination of a setting
parameter file
Name of Loaded file