Instruction manual

Output Amp Settings
4-19
Output Amp Settings
In the System dialog, click the tab of the slot in which the output amp is installed to set the output ranges.
Output Range Setting
You can select an output range of 1 V to 5 V in 0.1 V steps.
■ If recording or reproducing on low-speed sampling series, buy the optional unit to analog-output form
output amp.
■ Make sure to specify the source slot installed the input amp at the Output Slot.
■ In LX series, ±100% of input range is equivalent to ±25000 of 16 bits A/D or ±6400000 of 24 bits A/D,
so that the output amp outputs the signal at a scale of +/- 100% of the specified output range.
For example, if you record + 1V signal at the 1 V input range and you set the output range at 2 V, you will
obtain a +2 V signal corresponding to the recorded 1 V signal.
Select the output ranges.
Specify a source slot of
the input amp for
output.