Instruction manual

Sensitivity Setting Using TEDS Functions
4-13
4. Click OK when the <Update TEDS information> message is displayed.
You can view the list of the TEDS transducer information connected to the amp, such as; Sensitivity
(sensitivity), Unit (unit), Serial number (serial), Manufacturer name (manufacturer), and Calibration
date (cal date).
Turn on the check box of the channel to reflect the sensitivity of the loaded TEDS information.
5. Click OK to write the applicable slope value (reciprocals of the loaded sensitivity) to the header file. Then,
the window is closed. Open the channel property list at the main window to confirm that the slope value is
updated based on the loaded TEDS information.
(See “Channel Property” on page 5-17.)
Check Box