Instruction manual

Input Amp Settings

4-9

AR-LXPA100 Setting Dialog

Bal/Unbal: Only a combination of DC/OFF/FLAT selections is applicable at Unbal.

■ At the AR-LXPA100 amp, the sensor power supply voltage is 28 V DC as a standard setting. Contact TEAC

for a 24 V DC setting.

Select the weighting

filter.

A: A filter

C: C filter

FLAT: Flat

Select HPF

(High Pass

Filter).

OFF: No

10Hz: 10 Hz

20Hz: 20 Hz

Select the input range(0.01 V、0.0316 V、0.1 V、0.316

V、1 V、3.16 V、10 V、50V)

Select the coupling mode

AC: AC coupling

DC: DC coupling

Select turning ON or OFF of the power supply

to the sensor connected.

OFF: No supply

4mA: Supply 4 mA constant current

Select: Balanced

or Unbalanced input

Bal: Balanced

Unbal: Unbalanced

Automatically set to DC coupling for all the

8 channels when the unbalanced input is

selected

Confirm input level of every channel

Stop confirming input channel

Set input range automatically