Instruction manual

Outline of Main Window
3-2
Outline of Main Window
When you start the LX Navi program, the following main window will be displayed.
Status dialogue display area Menu bar Toolbar Status bar display
Waveform
display area
Status Dialogue Display Area
Time axis scaler for
Waveform display
Confirm
the contents of the comments, which has been entered
Confirm the f
ile name for recording or specify/confirm the file for reproducing
Confirm
the directory name for recording or specify/confirm the directory for reproducing
Confirm
the device for recording or reproducing (MEMORY, CARD,
and PC
)
Switch between the recording mode(REC) and the view mode(VIEW)
R
emaining time (hour:mimute:sec) for recording on the specified device of the LX main unit
and the ratio of the free space size(%) to total size of the media
※If the remaining time is displayed in cyan color, it indicates that the media has a free space
of 4GB or more and that the actual remaining time is much longer than the displayed time.
Specify and confirm the monitor channels
Specify and confirm the ON/OFF of voice memos recording
Specify and confirm the sampling
frequency
for recording/reproducing
The
unit name or the serial number of the LX main
unit
R
emaining time (hour:minute:sec) for recording on the PC
※If the data transfer speed is low, this item is displayed in yellow or red and it indicates
that the data transfer to the PC is delayed. In such a case, the memory in the LX main
unit might become full and the recording may finish earlier than the recordable time that
is being displayed.