Instruction manual

Inserting and Ejecting Media
2-19
PC Card
On the PC, format the PC Card to FAT16 or FAT32 (not quick format) before using. Format the PC Card
exceeding 2GB to FAT32. (The format operation from the File menu of LX Navi is a quick format.) Type the
volume name and then click Format.
Ejecting Media
■ Turn off the power after you eject the media
Remove the media before powering off the LX. If the power is turned off during writing, the data recorded
on the media might become unreadable. Also, eject the media before moving the LX main unit. Moving the
unit while the media is inserted might result in damage.
■ Insert or eject the media when the LX is at the STOP state of the REC mode.
■ To discharge static electricity from your body, touch a metallic surface near you before handling the unit.
Never touch the PC card being inserted in the PC card slot while recording and replaying.
1. Open the cover of the drive.
2. Push the eject button to eject the PC Card.
3. Remove the media.
4. Close the cover of the drive.
■ You cannot remove the media during recording or reading. The data will be corrupted.
About Data on Media
In a PC's drive, the data recorded on a media can be recognized as files in TAFFmat format. Therefore, the
files can be read by commercially available analytical software. If you perform a file operation such as
moving, deleting, or renaming a file or folder on the PC, the link between the data file and the header file
might be lost, and the data might become unreadable on the PC. You should do no file operation except
copying files.