Instruction manual

Starting Program
2-15
Note that if the LX-100 series is already being used for another PC, a red check mark is displayed and USE
is displayed in the status field. In such a case, you cannot connect to that LX-100 series.
If a TCP connection is not possible because of a problem such as an incorrect IP address for the same
segment, a grey check box will be displayed along with IP ERR in the status field. In that case, specify an
appropriate IP address or check the IP address settings (Subnet mask, Gateway, etc.) between the PC and
the LX-100, and then connect to the LX-100 series.
When connecting to an LX-100 series that exists in a different segment (and, for example, going beyond the
router), select the IP Direct check box, enter the address of the device to be connected, and then click OK.