Manualshelf

Instruction manual

ManualsBrandsRatoc Systems ManualsHardwareCBFW3
21222324252627282930
Installing LX-100 Series (IEEE 1394 model)
2-6
4.
Double click ［1394Bus host Controllers］, and confirm that “Texas Instruments OHCI Compliant IEEE 1394
Host Controller” is added to indicate that the driver software has been correctly installed.
Now the OHCI driver installation has been completed. Next proceed to the LX-100 Series device driver
installation.
Install LX-100 Series Device Driver
The following screen samples are for Windows XP. However, these operations are helpful for Windows 2000.
1.
When the LX-100 is first connected to the PC, the following screen is displayed.
Click ［Next］.
2.
Click [Next]. The Following screen will be displayed.