Instruction manual

Connections
2-2
Connections
※ When the DC power voltage falls to +11V or less, the USAGE LEDs flash and the recording and
reproduction stop. If you are recording to memory, quickly copy the data to a media or to a PC.
Connect to PC 100BASE-TX LAN
interface (LAN Model)
Monitor Output
Oscilloscope, etc.
External Trigger(Contact Signal)
DC power※
(+11 ～ 30 V)
Or use the specified
AC adaptor
Optional
Battery Unit
BU-81
Connect to IEEE 1394 interface
(Either is available. Use TEAC
recommended IEEE 1394 interface
card for PC)
(1394 Model)
Tachometer Pulse Input
s(LX
-
120 only)
Remote Control
Unit
Cannot connect
with PC at a time
Input signal
Oscilloscope, etc.
Supplied Microphone
(when recording voice memos)
Supplied earphone
(when using an earphone to listen
to voice memos)
AQ-VU
Connecters
（Optional）
Connectors for
Sync.
Recording
SERIAL NO.
MADE IN JAPAN
RECORDING UNIT
12-28V ,
TEAC CORPORATION
LX-120
6.5-2.8A
BATTERY UNIT:BU-81