Instruction manual

Sampling Frequency and Number of Channels
1-16
Remarks: Cannot select the moving average other than 1 (one) at the Sampling Frequency settings shown
with *(asterisk).
In 24 bits A/D, 2ch (16 bits) of tachometer input is not available.
When using LAN as the main unit interface and PC direct recording, continuous recording operations
might not be possible (it might be stopped while recording because all memory has been used) on
setting the maximum number of recording channels. In such a case, increase the data transfer rate by
decreasing the sampling frequency by half or by decreasing the number of recording channels by half,
and use the LX main unit.