Instruction manual

Notes on Usage
1-6
Notes on Usage
Use of an UPS is Recommended
We recommend that you use an UPS (Uninterruptible Power Supply) whenever you use an AC adapter. This
can protect important data during a power stoppage. If the power is turned off while a media is in a drive,
data recorded on that media might become unreadable.
Use an optional battery unit to back up the operation on power stoppages.
Use Specified Media Only
Use PC cards checked by TEAC in advance (contact us for information). Other media might be unable to
record or reproduce correctly.
Compact Flash Cards Checked by TEAC for Correct Operations (as of July 2007)
SanDisk Corp. Lexar Media, Inc. Buffalo Technology, Inc.
128MB SDCFB-128-801 Professional RCF-G series
SDCFB-1000-801 1GB CF1GB-80-380 256MB RCF-G256M
1GB
SDCFB-1024-J60 4GB CF1GB-133-380 1GB RCF-G1G
2GB SDCFB-2048-J60 RCF-G series
4GB SDCFB-4096-J60NS
Hagiwara Sys-Com
2GB RCF-R2G
ultra Z-Pro series
128MB SDCFB-128-801 1GB HPC-CF1GZP
512MB SDCFB-512-801 2GB HPC-CF1GZP
ultraⅡ
256MB SDCFH-256-903
I-O DATA DEVICE, INC.
1GB SDCFH-1024-903 CFX シリーズ
2GB SDCFH-2048-903 256MB CFX-256M
ExtremeⅢ CF40 シリーズ
1GB SDCFX3-1024-903 1GB CF40-1G
2GB SDCFX3-2048-903 CF115 シリーズ
4GB SDCFX3-4096-903 8GB CF115-8G
8GB SDCFX3-8192-903
■ Turn off the power after you eject the media
Remove the PC card before powering off the LX. If the power is turned off during writing, data recorded on
the media might become unreadable. Also, eject the media before moving the LX main unit. Further, remove
the media before moving the LX main unit. Moving the unit while the media is inserted might result in
damage.
■ Remove Media
Insert or eject the media after confirming that “MEDIA READY” is displayed on the unit that is in the STOP
state of the REC mode.
■ Never Remove a Recorded File, Never Rename the File/Folder Name of a Recorded File By a Windows
Operation
Do not remove a recorded file or rename a file/folder name of a recorded file by a Windows operation. If you
manipulate the recorded files on the media by a Windows operation, such as partially removing the file, or
renaming the file/folder name, the link between the data file and the header file will be lost or the writing
speed to the media to support the specifications cannot be assured. Also, the data might be unreadable
when such media is re-inserted in the LX.
When reproducing the file recorded on the PC by the main unit of LX, refer to “Notes for reproducing a
PC-recorded file by the LX main unit” on page 9 in Section 5.