Instruction manual

Recording Synchronization
5-32
Meanings of displayed item after starting the program and executing the “Update List”
Status of Check Box
status sync mode Meaning
Check Mark On
It is p
ossible to run the unit
(connected previously)
Check Mark Off
It is possible to select the unit f
or
running
Red Check Mark On
[grey background]
USE
Unit being used
(It is n
ot possible to select for
running)
Check Mark Off
[grey background]
IP ERR
IP address of the unit is out of
a
group
(It is n
ot possible to select for
running)
2 . The following figure results from clicking the “Sync Check” button. A check mark is added to the unit
specified as a master unit, and a check mark with a grey background is added to the one specified as a slave
unit. Confirm the check test of the synchronization connection and the turned-on check box, and then click
the “OK” button.
The following figure shows that serial no.107100 and no.107366 are assigned as master and slave1 for each
and that the synchronization connection was checked and found to be normal (The “status” of master unit
shows “CHECK” and slave unit shows “OK”.), and that the check box next to the serial no. has been turned
on automatically. (The check box with the grey background means slave unit) By clicking the “OK” button at
this time, the LX Navi begins to control the master unit.