Instruction manual

Contents of Displayed Message
5-23
WAR Media UnFormat.
Media not formatted. Cannot
enter REC STANDBY.
Format media and start to run.
WAR Media Write Protected. Media is write-prote
cted.
Cannot enter REC STANDBY.
Release the write-protected media and use it.
WAR Memory full. The memory in the
LX main
unit became full.
Recor
ding has finished. Save the recoding data on media
or PC using copy function as required.
WAR Media Not Ready.
No media for writing
parameter file.
Install the media on the LX main unit.
WAR Parameter file is invalid.
Contents of parameter file
are invalid.
Reproducing cannot be done since the
header file is
invalid.
WAR PC Dataset name is invalid. File name of PC is invalid. Confirm whether or not the file name of the
PC for
recording includes prohibited characters and change them
if required.
WAR PC Directory name is invalid.
Directory name of PC is
invalid.
Confirm whether or not the directory name of the
PC for
recording includes prohibited characters and change them
if required.
WAR Please install update Program
KB885222 of Microsoft.
Install Microsoft’s U
pdate
program KB885222.
Finish LX Navi, install Microsoft’s
update program
KB885222, and restart LX Navi again.
WAR Please set file name. Specify the file path name. Specify the file path name and finish.
WAR This file can't be selected. Cannot select this file. The data file(*.DAT) does not exist. Confirm the media.
WAR This unit has been Slave Mode.
Cannot operate in slave
mode.
The operation cannot be done in slave mode.
WAR The setting of the LX inside
was initialized.
The setting in LX main unit
has been initialized.
The setting saved in the LX main unit has been in
itialized.
Confirm and create
settings again. The setting is initialized
by change of amp unit.
WAR There is not enough disk space.
There is not enough disk
space on PC.
Increase the disk space of the
specified PC or change the
specified disk in the PC.
ERR Cannot Close LX SERIES. Cannot close LX Series. The logoff process of LX main unit does not function
when closing application. In case such status happens
repeatedly, please contact TEAC.
ERR Cannot Close LX SERIES. Cannot open LX Series. Confirm that
another LX Navi has been running already.
If not running, turn the LX main unit off/on to restart it.
ERR error code (n). This application
is closed automatically.
Command execution error
has
occurred. Close the
application.
Confirm that the interface cable, etc.,
is connected
properly, and restart to run. If this
happens repeatedly,
please contact TEAC.
ERR Size of command parameter
is invalid.
Parameter size of command is
invalid.
Confirm the interface cable, etc., is connected properly
,
and restart to run. If this
happens repeatedly, please
contact TEAC.
ERR Failed to Calibration of Slot (n). Failed to calibrate of slot (n). Turn off/on the LX main unit to restart it. If this
happens
repeatedly, please contact TEAC.
ERR Failed to Calibration. Failed to calibrate. Turn off/on the LX main unit to restart it. If this
happens
repeatedly, please contact TEAC.
ERR Failed to get catalog data.
Failed to get catalog data (file
information of media).
Confirm that the installed media is not in an
improper
state.