Instruction manual

Overview
1-2
Overview
The LX-100 series instrumentation data recorders can record and reproduce signals of a maximum of 48 kHz
sampling frequency via 8 channels onto PC card media in the case of 16bit AD. Recorded data on the media
is stored as PC files. The maximum number of input channels is 32 by using the selectable types of the 8-
channel input cards and the optional channel expansion unit. You can choose the recording media from
among the followings: Recording to the internal memory or to a PC card. Also, you can save the recorded
data as PC files by connecting to a PC. The file format is TEAC's proprietary TAFFmat format. TAFFmat files
can be loaded into commercially available analysis software.
From a PC you can use the supplied LX Navi software to set recording conditions such as the input range or
sampling frequency. The interface with a PC is hot-pluggable and compatible with IEEE 1394. So, after the
setup, you can disconnect the LX while the power is still on, and start or stop recording by using control
buttons on the main unit. You can choose the 100BASE-TX Ethernet interface as an alternative. You can also
use LX Navi to record or reproduce while connected to a PC.
An optional color LCD remote control unit is available to set recording conditions, to record and reproduce,
and to monitor by use of bar meters.
LX-100 series
Remote Control Unit
Input Amp
Output Amp
Record
Reproduce
Direct
Memory
PC Card
IEEE1394
Or LAN
Test0001.da
t
PC Card slot
PC Card adapter +Compact Flash
System Diagram