User`s guide

Windows XP

2-6-1. Installing the CB32U on Windows XP

1. Check to see if your PCMCIA Controller supports CardBus PC Cards.

a. Right-click on the Start button.

b. Right-click on My Computer and select Properties. You will see the System Properties window

below.

c. Click the Hardware tab.

d. Click the Device Manager button.

2-6. Windows XP Setup

Here’s how to get started with the CB32U and SCSI devices on Windows XP:

1. Read the restrictions before you install the CB32U.

2. Install the CB32U into the PC. Refer to Chapter 2-6-1.

3. Confirm the installation. Refer to Chapter 2-6-2.

4. Remove the CB32U from the PC. Refer to Chapter 2-6-3.

5. Connect a SCSI device. Refer to Chapter 3-1.

6. Confirm the SCSI connection. Refer to Chapter 3-2.

*You must be logged on as Administrator or have administrator privileges to install the CB32 driver.