User manual
Function Setting Explanation
HOLD ON or OFF
Banknote ejection with or without
holding on to it.
TONE ON or OFF Switch on or off acoustic signals.
LED ON or OFF
Switch on or off the frame light func-
tion.
ECO OFF, 15, 30, 45, 60
The device turns off automatically after
a deļ¬ned period of time without use.
(Ecomode)
BANKNOTE Arrows point to the front or the rear
Select the ejection of the detected
banknotes, false or suspect notes eject
against the selected direction.
LANGUAGE English, Deutsch, Francais, Italiano, Espanol The currently used language appears.
RESET Set to factory settings
Press ON/OFF for several seconds to
set all functions to factory settings.
(factory settings are highlighted as fat
above)
Following functions can be activated or inactivated:
Special functions
Cleaning Message
In the event a cleaning is needed, the message CLEAN appears after switching on the device. The
frame lights up with red light. Turn not off the device for the cleaning process. Clean all sensors
by opening cover.
Low-power mode
If the device is unused, it automatically switches to Low-power Mode after 10 minutes. During this
mode only the arrows above the display are activated. After inserting a banknote to the feeder,
the Low-power mode is automatically switched off again.
Note: Use the ECO function to save even more energy.
6 6
7 7