Operating instructions

Settings Time/Date
62 / 84
You can set the time and date on your unit for correct evaluation of HACCP data. Carry out
the settings as follows.
step info/button instructions
1 "Prog/Start" anwählen
2 Turn the selection button clockwise.
3 appears on the display.
4 Press the button.
5
“24 12” appears in the top display for the time
mode. “24” appears in the lower cooking time/
core temperature display, showing the current
time format.
6
Turn the lower selection button if you wish to
change the time format from the 24-hour to the
12-hour pm/am format.
7
Turn the lower selection button if you wish to
change the time format from the 24-hour to the
12-hour pm/am format.
8
Shown on the upper display for the hour setting.
The current hour appears in the lower display.
9
Turn the lower selection button to set the hour
and save this using the “prog/start” button.