User`s manual

Rastergraf
1-22 General Information
1.5.5 J2 Connections to the CompactPCI Bus (optional)
Z A B C D E F
1 GND PK_GND GND RIO_BVSYNC RIO_DDCH PK_GND GND
2 GND RIO_TX2L VCC RIO_TX1L RIO_TX0L GND
3 GND RIO_TX2H GND RIO_BHSYNC RIO_TX1H RIO_TX0H GND
4 GND VIO GND GND
5 GND VIO GND
6 GND GND GND
7 GND GND VIO GND
8 GND GND GND
9 GND GND VIO GND
10 GND GND GND
11 GND GND VIO GND
12 GND GND GND
13 GND GND VIO GND
14 GND GND GND
15 GND GND RIO_BLU RIO_RED GND
16 GND GND GND
17 GND GND RIO_GRN RIO_DDAH GND
18 GND GND GND
19 GND GND GND GND
20 GND RIO_TXCH GND GND GND
21 GND RIO_TXCL GND GND
22 GND n/c n/c n/c n/c n/c GND
Note: byp means the pin is connected to a bypass capacitor on the
graphics board but is otherwise not used
Pins used for Rear Panel I/O are used in Slot 1. This board MUST
NOT be installed in Slot 1.
PK_GND are grounds that are added by Rastergraf.