Operation Manual

Now that you have your disk image, use the instructions on flashing an SD card from Chapter 1, “Meet the Raspberry Pi”, to
write it to the new card. Remember that writing an image takes time, so be patient and let it finish fully.
When the image writing has finished, you’ll have two SD cards containing the exact same data, including the same partition table.
This means that while the new card might be 16 GB or 32 GB, the Pi will only be able to access the same 2 GB or 4 GB of the
original card.
To ensure the Pi can make use of the space on the new card, follow the instructions in “Resizing Existing Partitions” earlier in this
chapter.