User manual

Ausgabe 13.10.2017 Copyright by Joy-IT 4

3.2 / 3.5 Touch-Display

2. Installing the software

Install, on your SD-Card, the FBTFT Image with the „Win32 Disk Imager“-Program. You can download the

image les here:

 3,2“ LCD Image-Download

 3,5“ LCD Image-Download

Alternave downloadlinks:

 3,2“ LCD Image-AlternaveDownload

 3,5“ LCD Image-AlternaveDownload

[Expert-Section]

Manual installation of the FBTFT-Modul

If you are already using a Raspbian Jessie Image and want to upgrade this with the 3.2“/3.5“ Touchscreen

-TFT, then you can also install the needed FBTFT modules.

First, the „cong.txt“-File needs to be edited.

Therefore, the following lines needs to be appended.

You can edit the le directly on your Raspberry Pi with the following command:

You need to add the following lines at the end of the le:

For the 3.2“ TFT:

For the 3.5“ TFT:

sudo nano /boot/config.txt

dtparam=spi=on

dtoverlay=joy-IT-Display-Driver-32b-overlay:rotate=270,swapxy=1

dtparam=spi=on

dtoverlay=joy-IT-Display_Driver-35a-overlay:rotate=270,swapxy=1