Information

3
Raspberry Pi TV HAT
raspberrypi.org
Warnings
Safety instructions
This product shall only be connected to a Raspberry Pi computer.
This product should be operated only in a well ventilated environment, and if used inside a case, the case
should not be covered.
This product should be placed on a stable, at, non-conductive surface while in use, and it should not be
in contact with conductive items.
All peripherals used with this product should comply with relevant standards for the country of use and be
marked accordingly to ensure that safety and performance requirements are met. These articles include,
but are not limited to, keyboards, monitors and mice when used in conjunction with the Raspberry Pi.
Where peripherals that do not include a cable or connector are connected to this product, the cable or
connector that is used must offer adequate insulation and operation in order that the relevant performance
and safety requirements are met.
To avoid malfunction or damage to this product, please observe the following:
Do not expose to water or moisture, or place on a conductive surface while in operation.
Do not expose to any source of heat. The Raspberry Pi TV HAT is designed for reliable operation at normal
ambient room temperatures.
Take care while handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
Avoid handling the printed circuit board while it is powered, and handle only by the edges, to minimise the
risk of electrostatic discharge damage.
Physical specications