Datasheet

06 February 2012 Broadcom Europe Ltd. 406 Science Park Milton Road Cambridge CB4 0WW Page 80
© 2012 Broadcom Corporation. All rights reserved
20 DTO_ERR Create interrupt if timeout on data line:
0 = no
1 = yes
RW 0x0
19 CBAD_ERR Create interrupt if incorrect command index in
response:
0 = no
1 = yes
RW 0x0
18 CEND_ERR Create interrupt if end bit on command line not 1:
0 = no
1 = yes
RW 0x0
17 CCRC_ERR Create interrupt if command CRC error:
0 = no
1 = yes
RW 0x0
16 CTO_ERR Create interrupt if timeout on command line:
0 = no
1 = yes
RW 0x0
15
Reserved
-
Write as 0, read as don't care
14 ENDBOOT Create interrupt if boot operation has terminated:
0 = no
1 = yes
RW 0x0
13 BOOTACK Create interrupt if boot acknowledge has been
received:
0 = no
1 = yes
RW 0x0
12 RETUNE Create interrupt if clock retune request was
made:
0 = no
1 = yes
RW 0x0
11:9
Reserved
-
Write as 0, read as don't care
8 CARD Create interrupt if card made interrupt request:
0 = no
1 = yes
RW 0x0
7:6
Reserved
-
Write as 0, read as don't care
5 READ_RDY Create interrupt if DATA register contains data to
be read:
0 = no
1 = yes
RW 0x0