Raspberry Pi 3 Model A+ Published in November 2018 by the Raspberry Pi Foundation www.raspberrypi.
Overview The Raspberry Pi 3 Model A+ is the latest product in the Raspberry Pi 3 range. Like the Raspberry Pi 3 Model B+, it boasts a 64-bit quad core processor running at 1.4 GHz, dual-band 2.4 GHz and 5 GHz wireless LAN, and Bluetooth 4.2/BLE. The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.
Specification Processor: Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz Memory: 512MB LPDDR2 SDRAM Connectivity: 2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE Access: Extended 40-pin GPIO header Video & sound: 1 × full size HDMI MIPI DSI display port MIPI CSI camera port 4 pole stereo output and composite video port Multimedia: H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.
Physical specifications all dimensions in mm WARNINGS • This product should only be connected to an external power supply rated at 5 V/2.5 A DC. Any external power supply used with the Raspberry Pi 3 Model A+ shall comply with relevant regulations and standards applicable in the country of intended use. • This product should be operated in a well-ventilated environment and, if used inside a case, the case should not be covered.
Raspberry Pi 3 Model A+ Product Brief
HDMI is a trademark of HDMI Licensing, LLC Raspberry Pi is a trademark of the Raspberry Pi Foundation www.raspberrypi.
