Raspberry Pi PoE HAT
Raspberry Pi PoE HAT Overview The Raspberry Pi PoE HAT is an add-on board for the Raspberry Pi 3 Model B+ (and later boards). It is used to power the Raspberry Pi via an Ethernet cable, provided that power-sourcing equipment is installed on the Ethernet network. The HAT also includes a fan that will cool the processor on the main Raspberry Pi board. raspberrypi.
2 Raspberry Pi PoE HAT Specifications Standard: IEEE 802.3af-2003 PoE Input voltage: 37–57 V DC, Class 2 device Output power: 5 V DC/2.5 A Cooling: 25mm × 25mm brushless fan delivering 2.2 CFM for processor cooling Features: Fully isolated switched-mode power supply Fan control Compliance: For a full list of local and regional product approvals, please visit www.raspberrypi.
3 Raspberry Pi PoE HAT Physical specifications Note: all dimensions in mm Warnings This product shall only be connected to a Raspberry Pi 3 Model B+ or later. Any external power-sourcing equipment/power injector used to enable a Ethernet network shall comply with relevant regulations and standards applicable in the country of intended use. This product should be operated in a well ventilated environment and, if used inside a case, the case should not be covered.
Raspberry Pi is a trademark of the Raspberry Pi Foundation
