User Manual

2/12/2018 PiJuice/Software at master · PiSupply/PiJuice · GitHub
https://github.com/PiSupply/PiJuice/tree/master/Software 2/18
./pckg-pijuice.sh --light
Note: You will need python-stdeb, dh-systemd and debhelper in order to be able to build.
GUI Menus
We have also taken a LOT of screenshots of all the different menu options etc to show you the full software. So lets get stuck
in:
We have compiled the source code into a .deb Debian package file so it is super easy to install. Once installation is complete
the software appears in the system menu under Menu -> Preferences -> PiJuice Settings as you can see in the above image.
System Tray
Once you load the software, you will see the PiJuice icon appear in the system tray, as above. This icon shows you the status
of the PiJuice - charging from Pi, charging from PiJuice, running on battery as you have in a normal laptop computer.
Additionally you can hover over it to tell you the charge level of the battery.
Note that it is not possible to detect battery not present when powered through on board USB micro, so it might show 0% only.
 
 
 