User Manual
2/12/2018 PiJuice/Software at master · PiSupply/PiJuice · GitHub
https://github.com/PiSupply/PiJuice/tree/master/Software 10/18
The battery menu is a very important one. It basically allows you to set charge profiles for the PiJuice charge chip in order to
correctly and efficiently charge the battery, correctly monitor the charge percentages and more. We have got a number of
built in presets such as the ones that will come with the PiJuice by default (the BP7X) and all of the other ones we will supply.
But as promised, there is also the ability to add your own custom charge profiles and even your own battery temperature
sensor in order to increase the safety and efficiency of charging your batteries.
As previously mentioned, some of these are even hard coded into the firmware on the PiJuice which enables you to actually
select profiles using the PiJuices on board DIP switch.
More information on the default profiles and how to created additional ones can be found in theHardware Section
PiJuice HAT Config IO Menu
