Data Sheet

RB-Pis-13
Mixed Signal Oscilloscope for Raspberry Pi
It is a tiny mixed signal scope but don’t let the size fool you. It’s a full featured mixed signal
oscilloscope, test and measurement system (read full details). It’s USB powered and it is fully user
programmable. It comes with a set of ten mixed signal mini-grabber test probes and powerful software
for Windows, Mac OS X, Linux and Raspberry Pi. It is the ideal diagnostic and debugging tool for any
analog, digital or logic circuit.
This is a go anywhere problem solver that fits in the palm of your hand. In the lab or in the field,
working in hot or wet conditions, even attached to a flying quadcopter, it’s the perfect diagnostic tool
for hardware hackers, experimenters, students and engineers.
Powerful software, flexible solutions
BS05 is no toy. It works with the full suite of software and it’s fully user programmable. Program it in
a variety of languages including C/C++, Python andPascal or integrate it with third party software.
All the inputs and outputs you need
BS05 uses an IDC-10 connector for access to all its analog and digital inputs and waveform and clock
outputs. It’s conveniently arranged so the two ground pins can pair with the analog inputs, waveform
and clock generator outputs or logic inputs L0, L2 and L4. This model can capture 8 logic/timing
channels but in this case logic channels L6 and L7 are derived from the analog channel comparators.
This is a very powerful feature because it means the voltage ranges and switching levels for those two
channels can be adjusted to suit almost any logic family, even inverted ones.
It’s a dual channel oscilloscope
BS05 is a real dual channel digital oscilloscope with fully compensated 1M/20pF analog inputs. It’s
specifically designed to be able to be used with standard oscilloscope probes.
All that’s needed is a two pin header to BNC adapter which can be made for a few dollars using