User's Manual

UCI-MSD User manual
V1 10/2020
3 / 5
Useful information and troubleshooting:
- The receiver Wi-Fi AP does not broadcast any SSID. It will be “invisible” to other Wifi-
devices.
- Each transmitter-receiver set uses unique WiFi-authentication-keys, which are
generated via an embedded algorithm.
- When the filesystem of a sender-drive (‘SENDER’) is modified, the drive is removed from
the sender host once the write-process is completed and reconnected automatically on
synchronisation complete.
- If data-synchronisation between transmitter and receiver was successful, the sender
drive is wiped (‘SENDER’).
- Data doesn’t persist on transmitter nor receiver. Once the USB-connection is removed
or the host device powered down, all data is lost.
- To speed up link-creation between transmitter and receiver, it is recommended to
power up the receiver first and then the transmitter(s) afterwards.
- If it is not possible to establish a link, check the label for the set-number on both the
receiver and transmitter(s). The set-id must match for proper operation.
- If the link fails to establish, check the functionality of the devices using a PC. Plugin both
the receiver and transmitter to the same PC, starting with the receiver. The latest, after
90 seconds a drive named ‘RECEIVER’ will show up. Now plugin the transmitter(s). After
max. 90 seconds drive(s) named ‘SENDER’ should show up on the PC. If this is not the
case get in contact with the distributor or manufacturer.