User's Manual

ManualsBrandsRaspberry Pi Zero W ManualsElectronicsWireless USB Data Transmitter

UCI-MSD User manual

V1 10/2020

1 / 5

User manual

ilviSmart UCI-MSD wireless USB data transmitter and receiver

Manufacturer:

ilvi GmbH

Business Park 4

8200 Gleisdorf

AUSTRIA

Package content (set):

- UCI – MSD Receiver

- UCI – MSD Transmitter(s), quantity depends on customer order.

- User manual

Intended use:

UCI-MSD emulates a USB-drive (USB-Mass-storage) and provides wireless data transfer from

one or more of these USB-drives to another.

The transmitter device(s) establishes a secure wireless link to the receiver device using WiFi-

technology.

Once transmitter(s) are connected to the receiver device, folders and files are synchronized to

the receiver USB-drive automatically.

For simplicity, one can think of UCI-MSD as a wireless-USB-Stick.

Summary of content (5 pages)

PAGE 1
User manual ilviSmart UCI-MSD wireless USB data transmitter and receiver Manufacturer: ilvi GmbH Business Park 4 8200 Gleisdorf AUSTRIA Package content (set): - UCI – MSD Receiver - UCI – MSD Transmitter(s), quantity depends on customer order. - User manual Intended use: UCI-MSD emulates a USB-drive (USB-Mass-storage) and provides wireless data transfer from one or more of these USB-drives to another.
PAGE 2
Installation and operation: To operate UCI-MSD as intended, both USB data and power connection is required. Both are provided by the USB-host device once the USB-A cable is plugged in. 1. Plugin the UCI-MSD receiver’s USB-Cable into the USB-Port of the receiving PC or USBMass-storage capable device. A drive named “RECEIVER” will show up within max. 90 seconds after plugging in. 2. Plugin the UCI-MSD transmitter’s USB-Cable into the USB-Port of the transmitting USBMass-storage capable device. 3.
PAGE 3
Useful information and troubleshooting: - The receiver Wi-Fi AP does not broadcast any SSID. It will be “invisible” to other Wifidevices. - Each transmitter-receiver set uses unique WiFi-authentication-keys, which are generated via an embedded algorithm. - When the filesystem of a sender-drive (‘SENDER’) is modified, the drive is removed from the sender host once the write-process is completed and reconnected automatically on synchronisation complete.
PAGE 4
General information: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modification not expressly approved by the manufacturer could void the user’s authority to operate this equipment. For satisfying FCC rule part 2.
PAGE 5
Technical data: Dimensions Cable length Connector Input-Voltage Power consumption Wifi Compliance and conformity 88x44x21.75mm (length x width x height) 1.8m USB-A 4.75V to 5.25V ~ 1250mW 2.4GHz 802.11b/g/n WLAN WPA2 encrypted SSH-Tunnel (Rsync) RoHs (2011/65/EU) EMC (2014/30/EU) FCC (FCC 47 part 15) ilvi GmbH Business Park 4 8200 Gleisdorf AUSTRIA office@ilvi.