User Manual

嵌入式蒸氣焗爐 Built-in Steam Grill Oven
– 34 –
6.5 Cooking function setting
The appliance offers 13 cooking functions in total including STEAM, GRILL and STEAM GRILL functions for users,
meeting with different cooking preferences. Cooking functions are classified as follows:
STEAM functions: including Steam and High Steam
GRILL functions: including Quick Grill, Convection, Upper and Lower Grill, Convection and Lower Grill, Lower Grill,
Upper Grill, Upper High Grill and Convection and Lower Grill
STEAM GRILL functions: including Low Steam Grill, Medium Steam Grill and High Steam Grill
Follow the below procedures to operate: Select cooking functions->Setting cooking time->Setting cooking
temperature->Operation starts
6.5.1 Select cooking functions
Under selection mode, press STEAM [ ], GRILL [ ] or STEAM GRILL [ ] key to select steam cooking modes, grill
cooking modes and steam grill cooking modes in order. Press them repeatedly to select different cooking function
under that category, or user can press Increase [ ] or Decrease [ ] key to choose in cycle. Corresponding icon will
blink on display for selected function, and default cooking temperature and time will be shown on display. Once
selected, press Temp./Time [ ] key once, cooking time indicators will start to blink.
6.5.2 Setting cooking time
Press Increase [ ] or Decrease [ ] key to set desire cooking time. Press and hold can access quick adjustment
(Increase or decrease by 10 minutes each time). Once finish, press Temp./Time [ ] key again, cooking temperature
indicators will start to blink.
6.5.3 Setting cooking temperature
Press Increase [ ] or Decrease [ ] key to set desire cooking temperature. Press and hold can access quick adjustment.
Once finish, press start/pause [ ] once to confirm. Preheat indicator (PRE) and oven lamp will light up, representing
that preheat is in progress.
6.5.4 Operation starts
When the appliance reaches set temperature, buzzer will sound “beep” for three times. Preheat indicator (PRE)
will switch off while Cooking indicator (OPE) will switch on. User can put the ingredient prepared into the cavity.
Once operation completed, the buzzer will sound “ding dong” and the display will show wordings “End”,
representing the cooking function has been completed.
Attention! The cavity temperature is still high after cooking, the cooing fan will keep operating for a period of
time to discharge the residual temperature.
Note:
• If default cooking time and temperature is used, user can start the operation directly by pressing Start/pause
[ ] key once cooking function selected.
• Once cooking time and temperature set, press Temp./Time [ ] key can switch cooking time and temperature
settings alternatively.
• If STEAM or STEAM GRILL cooking functions is used, out of water may happen during operation. Water tank
will automatically pop out to remind user refilling water, or user can press the Water Tank [ ] key manually
to fill water during operation.
6.6 Application of auxiliary functions
Apart from STEAM, GRILL and STEAM GRILL cooking functions, there are 6 auxiliary functions offered to meet
different needs of users. Auxiliary functions include Sterilization, Ferment, Keep warm, Defrost, Descaling and Auto
menu.