User Manual

嵌入式蒸氣焗爐 Built-in Steam Grill Oven
– 26 – – 27 –
Installation Method
First, put the appliance inside the preserved area in the cabinet. (Pay attention to the power
cord location, such to connect the electricity after installation). Open the oven door, tighten the
4 screws supplied to the 4 holes as the arrows illustrated above. Make sure that the appliance
is fixed in place before connect to the electricity.
Notice for Installation
WARNING: The appliance must be grounded to avoid electric shock!
➢
Installation must comply with the prevailing standards and regulations and conducted
by qualified technicians.
➢
For cabinet installation, the material of the cabinet (plastic and molding wood) should be
heat-resistant bonding. Improper materials or bonding agent will lead to deformation
and incomplete adhesion.
➢
There should be enough space left for electrical connection of household appliance.
➢
The cabinet holding the appliance should be firm with enough supporting strength.
➢
Install the appliance firmly.
➢
The appliance could be installed in an in-line type cabinet or right under the standard
cabinet, given it is ventilated adequately.
➢
The length of power cord is around 1.3 meters and earth, neutral and live conductors
must be connected correctly.
➢
Place the food tray, grill rack and oil tray into the shelf horizontally. Do not impede the
oven door close.