Use and Care Guide

©2019 RI
REV 11.14.2019
2
MAINTENANCE
The type or frequency of traffic on your Tile or Plank will determine the
frequency of maintenance needed. The color of the floor will have some
bearing on how much care may be necessary. Regular adherence to an
effective maintenance program should include: Thorough dirt and grit
regulation, Prompt removal of spills and stains, Protection of the floor
surface. The most effective part of any floor maintenance program is the
simplest: sweep, dust mop or vacuum DAILY, or more frequently if needed.
INITIAL MAINTENANCE UPON COMPLETION OF THE INSTALLATION
• Sweep or vacuum thoroughly and remove any adhesive residue from
surface. RI Adhesive / Scuff Remover or Mineral Spirits can be used.
• Do not wash floor for at least 48 hours after installation.
• Lightly damp mop with a RI Neutral Cleaner or RI No Rinse Cleaner.
Remove any scuffs and excessive soil by careful scrubbing. Certain
types of rubber heel marks may be removed by rubbing with a cloth
dampened with RI Adhesive / Scuff Remover.
• All traffic and furniture should stay off the floor for at least 24 hours to
allow the adhesive to dry. Do not wash any installation for 48 hours.
• In order to prevent indentations and scratches, provide glass, plastic or
other non-staining cups with flat under surfaces not less than 2” in
width for the legs of heavy furniture or appliance.
o Equip swiveled-type office chairs and other rolling furniture with
broad surface non-staining casters at least 2” in diameter.
o Remove small diameter buttons from the legs of straight chairs
and replace with metal glides that have bearing surfaces not less
than 1” in diameter.
o Protect your floor against burns. Burns from the glowing end of
a cigarette, matches, or other extremely hot items can damage
floors.
o Do not flood floor, subject to frequent standing water, or use in
high moisture areas.