Operation Manual

8 Rascal Vision Scooter Owner's Manual and Service Record

Controls

Before driving your vehicle it is important to familiarise yourself with the controls. Do not attempt to drive the

vehicle before reading the rest of this Owner’s Manual.

Dashboard Description

1. Battery Indicator: This indicator shows the level of charge in the batteries. When all segments are shown

the batteries are full. As the charge level of the batteries depletes, so the number of lit segments will drop.

Note: When the vehicle is climbing a steep incline or starting off, the level may drop momentarily; this is normal.

Tip: When the batteries need charging urgently the "mains plug" symbol will appear

Always fully charge your batteries before setting out on a trip.

2. Speed Control: This controls the preset top speed of your scooter. When the knob is turned anticlockwise

to the left, this is its slowest speed, marked by a tortoise. As the knob is turned to the right the speed will

increase to a maximum, marked by a hare. Set the speed before you move off. Do not adjust the speed

control dial when the vehicle is moving.

3. Power On Indicator: When the ignition key is inserted into the scooter and turned to the "on" or "I"

position, the LCD panel will illuminate.

Tip: If a spanner symbol and a number in the range 1 -10 appears and persists, this may indicate a fault.

A key to the fault codes can be found in the "Scooter diagnostic functions" section of this manual.

A common "fault" is that the scooter has been left in freewheel mode. This will be shown by the spanner

symbol flashing and the digit "5" being displayed. Turn the key to the "0" or off position, disengage the

free-wheel mode and turn the key back to the on or "I" position.

4. Horn: Press the button and the horn will sound, if power is on. Release and the horn will cease.

Ignition key