Operation Manual

Model 140T/140F Owner’s Manual
EMC Part: 44000700 • Rev.02 • 04/19/06
33
ELECTRIC
MOBILITY
Storage DO NOT store your 140T/140F Vehicle in damp conditions. This may affect the electronics if left
for very long periods of time.
Electronics Servicing of the drive electronics and charger should only be carried out by your local service
center. These units are sealed and should not be opened. BROKEN SEALS WILL VOID
YOUR WARRANTY. DO NOT operate your Model 140T/140F Vehicle in extreme weather
conditions, i.e. very heavy rain or snow. DO NOT drive through water. This may damage the
main electronic controller of your 140T/140F Vehicle.
Motor Brakes If the motor brakes are functioning correctly, you will not be able to push your machine when the
key is switched off or switched on with the brake lever in the “DRIVE” position.
Safety Note: For your own safety, we recommend that you check the function of your 140T/140F
Vehicle brakes prior to use.
Driving Brake When you drive your Model 140T/140F and let go of the control lever, your vehicle should reduce
speed very quickly and come to a gentle stop. If you notice a change in the normal driving/slowing
condition and your Model 140T/140F does not slow down quickly, please do not use your vehicle
and contact your local service center or call 1-800-257-7955.
Tires Front and rear tires of your Model 140T/140F are foam-filled and do not require air pressure.
Tires should, however be checked periodically for damage, cuts, flat spots, or excessive tread wear.
Damaged tires should be replaced.