Operation Manual

Model 140T/140F Owner’s Manual

EMC Part: 44000700 • Rev.02 • 04/19/06

ELECTRIC

MOBILITY

3. Grip seat post and lower rear assembly so that front frame and rear drivetrain assembly are reconnected and

contacts touch.

4. Fasten the frame buckle and secure the release latch.

5. Position handlebar assembly into preferred driving position.

6. Install Battery Case.

7. Install seat (see “Installing Seat” on page 8).

8. Turn key to “ON” position. If no power check the contacts between front frame assembly and rear drivetrain

assembly or confirm that brake release lever is in drive mode.