Operation Manual

Model 140T/140F Owner’s Manual
EMC Part: 44000700 • Rev.02 • 04/19/06
27
ELECTRIC
MOBILITY
Re-assembling the Model 140T/140F
The Model 140T/140F involves re-attaching the front frame assembly to the rear drivetrain assembly, locking the frame
buckle, re-positioning the handlebar assembly and dash for driving operation, and installing the battery case and seat.
To Reassemble the Model 140T/140F:
Figure 17 - Aligning Front Frame Assembly to Rear
Drivetrain Assembly
1. Place rear drivetrain assembly on firm, level surface with
drivetrain resting on rear small wheels.
2. Position front frame over top of the rear drivetrain
assembly so that slots of the rear drivetrain assembly
align with the brackets in the rear of the front frame, as
shown in Figure 17. Install front frame onto rear
drivetrain assembly.
Model 140F shown in Figure 17. Model 140T reassembles in
a similar manner.
WARNING!!
Reassembling the vehicle presents a pinch hazard! Be sure to keep hands, body,
clothing, jewelry, etc., free from labeled pinch points to avoid accidents or injuries.